From: Scott Morris (swm@emanon.com)
Date: Thu Apr 21 2005 - 19:45:43 GMT-3
Don't forget that "?" is your friend.
Emanon-R1(config)#policy-map Set-This
Emanon-R1(config-pmap)#class Who-Knows
Emanon-R1(config-pmap-c)#?
QoS policy-map class configuration commands:
bandwidth Bandwidth
compression Activate Compression
drop Drop all packets
exit Exit from QoS class action configuration mode
no Negate or set default values of a command
police Police
priority Strict Scheduling Priority for this Class
queue-limit Queue Max Threshold for Tail Drop
random-detect Enable Random Early Detection as drop policy
service-policy Configure QoS Service Policy
set Set QoS values
shape Traffic Shaping
<cr>
Emanon-R1(config-pmap-c)#set ?
atm-clp Set ATM CLP bit to 1
cos Set IEEE 802.1Q/ISL class of service/user priority
discard-class Discard behavior identifier
dscp Set DSCP in IP(v4) and IPv6 packets
fr-de Set FR DE bit to 1
ip Set IP specific values
mpls Set MPLS specific values
precedence Set precedence in IP(v4) and IPv6 packets
qos-group Set QoS Group
Emanon-R1(config-pmap-c)#
-----Total Telnet Time 8.54 seconds-----
Scott
;)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Matus
Sent: Thursday, April 21, 2005 6:26 PM
To: ccielab@groupstudy.com
Subject: precedence int cbwfq
is there a way to mark precedence in cbwfq?
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:06 GMT-3