ipv6: SLA and subnet ID

From: ccie2be (ccie2be@nyc.rr.com)
Date: Tue Apr 19 2005 - 19:43:16 GMT-3

• Next message: Paresh Khatri: "EIGRP split-horizon on NBMA interfaces"
• Previous message: marvin greenlee: "RE: The IE presentation on IPv6 [bcc][faked-from]"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi guys,
 
If I'm given this info in the lab, how do I figure out where to put what:
 
1. All ipv6 addresses will use FEC0/125 unless otherwise specified.
 
2. Configure a site-local subnet D between R1 and R2 and use SLA number B.
 
 
From the Cisco documentation, a site local address has a subnet ID but not a
SLA. While a global unicast address has a SLA but not a subnet ID.
 
Now, I realize that with a netmask of /125, there's lots of room to put
things where I want but if given only the above info, how do I figure out
what's OK?
 
TIA, Tim

• Next message: Paresh Khatri: "EIGRP split-horizon on NBMA interfaces"
• Previous message: marvin greenlee: "RE: The IE presentation on IPv6 [bcc][faked-from]"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:01 GMT-3