From: Lanny Ballard (lanny26ga@hotmail.com)
Date: Sat Apr 16 2005 - 18:55:46 GMT-3
Hey guys,
I'm doing Lab 20 in the ccbootcamp lab workbook, and I have a question
I have the statement "Configure Port Security on Cat1 so that R13 using the
IP address of 200.100.100.13 and the Mac Address of 0001.1313.1313 is the
only device allowed on the switchport
so I have on the catalyst:
int fa0/13
switchport mode access
swtchiport access vlan 100
switchport port-security
switchport port-security mac-addres 0001.1313.1313
!
arp 200.100.100.13 0001.1313.1313 fa0/13
and on R13
int fa0/0
ip add 200.100.100.13
mac-address 0001.1313.1313
Ok, so here's the deal. When I change the mac-address, the port shuts down
like it should; however, when I change the ip address on the router, the
port does not shut down. Can someone tell me what I'm missing here?
The sad part is I even checked the answers, and it looks like I have it
right, but I can't figure out what's missing.
TIA
Lanny
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:58 GMT-3