From: Jake Secrist (jjsecrist@yahoo.com)
Date: Sat Apr 16 2005 - 09:59:33 GMT-3
Ricky,
For your second problem, I pasted the output of Cisco's Error Message
Decoder (see below). This may not be a problem at all.
I was thinking maybe you had a duplex mismatch. Apparently, "The system
should recover." What is this interface connected to and are you having
problems on the other end?
Jake
*From Cisco's Output Interpreter*
**************************************************************************
1. %AMDP2_FE-6-EXCESSCOLL: [chars] TDR=[dec], TRC=[dec]
Ethernet or Fast Ethernet is detecting multiple collisions. This condition
may occur under heavy loads. The system should recover.
Recommended Action: No action is required.
Related documents- No specific documents apply to this error message.
2. %AMDP2_FE-6-EXCESSCOLL: [chars] TDR=[dec], TRC=[dec]
Ethernet or Fast Ethernet is seeing multiple collisions. This condition may
occur under heavy loads. If an interface fails to allocate a slot in which
it can transmit its frame without another collision for 16 times, it will
not retry the operation. The frame is not transmitted and is marked as an
excessive collision.
Recommended Action: The system should recover. No action is required.
Related documents- No specific documents apply to this error message.
**************************************************************************
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ricky Martin
Sent: Saturday, April 16, 2005 2:39 AM
To: Cisco certification
Subject: Some problems in the router
Well could any one point out what the problem could be over here.
1. The first problem
Rack3R6#
*Apr 16 02:26:35.215: %VIP2-3-MSG: slot1 VIP-3-SVIP_RELOAD: SVIP Reload is
called. *Apr 16 02:26:35.235: %VIP2-3-MSG: slot1 VIP-3-SYSTEM_EXCEPTION: VIP
System Exception occurred sig=20, code=0x900151B9, context=0x60A75804
Rack3R6#
*Apr 16 02:26:36.243: %DBUS-3-DBUSINTERRSWSET: Slot 1, Internal Error due to
VIP crash
When i give the show ip interface brief i am not able to see
fastethernet1/0/0
Rack3R6#sh ip int brief
Interface IP-Address OK? Method Status
Prot
ocol
ATM0/0/0 unassigned YES NVRAM up
up
ATM0/0/0.103 54.3.1.6 YES NVRAM up
up
Loopback0 150.3.6.6 YES NVRAM up
up
Virtual-Access1 unassigned YES unset up
up
Rack3R6#
This is the first problem
####################################################################
Second one
*Mar 1 00:40:49.071: %AMDP2_FE-6-EXCESSCOLL: Ethernet0/1 TDR=1, TRC=0
I am getting this in the router what could be the possibility to get this
error.
####################################################################
Thanx in advance
Ricky
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:58 GMT-3