From: Jean Baaklini (JEAN@se.ibm.com)
Date: Fri Apr 15 2005 - 05:18:26 GMT-3
No, just Ethernet connectections
Lee Donald <Lee.Donald@t-systems.co.uk>
2005-04-14 20:48
To
Jean Baaklini/Sweden/Contr/IBM@IBMSE, Lee Donald
<Lee.Donald@t-systems.co.uk>
cc
ccielab@groupstudy.com, nobody@groupstudy.com
Subject
RE: RPF failure
Are these all frame connections?
-----Original Message-----
From: Jean Baaklini [mailto:JEAN@se.ibm.com]
Sent: Thursday, April 14, 2005 5:33 PM
To: Lee Donald
Cc: ccielab@groupstudy.com; nobody@groupstudy.com
Subject: RE: RPF failure
Hi Lee,
let's say the layout looks like that:
Src
|
R1----------------R2
| |
| |
R3---------------R4
| (RP) |
|___________R5(mapping)
the RPF faillure happens on R4 (it sees R5 as the rpf nbr instead of R2)
My mroute looks like: ip mroute src-IP mask R2'sIPaddress
Any idea?
Cheers,
JP
Lee Donald <Lee.Donald@t-systems.co.uk>
Sent by: nobody@groupstudy.com
2005-04-14 18:08
Please respond to
Lee Donald
To
Jean Baaklini/Sweden/Contr/IBM@IBMSE, ccielab@groupstudy.com
cc
Subject
RE: RPF failure
It's sounds like your ip mroute statement is wrong, what's your config?
This static route will override any other dynamically learnt routes.
-----Original Message-----
From: Jean Baaklini [mailto:JEAN@se.ibm.com]
Sent: 14 April 2005 16:56
To: ccielab@groupstudy.com
Subject: RPF failure
Hi All,
I'm currently working on a multicast routing scenario on which I'd
appreciate your comments.
One of my routers is dropping the multicast feed because of a multicast
faillure : Its rpf nbr is the mapping agent (I'm using auto-rp) instead of
being the correct rpf (to the source).
I tried to add a multicast static route (even played with the admin
distances, ...) but I doesn't seem to change anything: the static route is
added to the config but when I type sh ip mroute <group> , the rpf nbr is
still the mapping agent.
I really don't get it... Does anyone have an idea?
Thank you
JP
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:58 GMT-3