From: Ralph (Mandela@myrealbox.com)
Date: Wed Apr 06 2005 - 20:24:37 GMT-3
If you are allowed to make the change on R6 then redistribute the route as a connected route using a route-map and set the metric with the route-map. You will also consider the cost of the media between R6 and R1 when setting the metric on R6.
HTH
R
-----Original Message-----
From: gladston@br.ibm.com
To: ccielab@groupstudy.com
Date: Wed, 6 Apr 2005 09:49:08 -0400
Subject: Changing the cost of a specific route on OSPF
Can you think a way to change the metric of one (just one) route received from a OSPF neighbor?
For example, R6 and R2 are both connected to R1.
R1 receives the same five routes from R6 and R2.
Is there a way to change the cost of just one of the routes received by R1 from R6?
I could not find a way, using OSPF.
I could influence the selection by using PBR, but is there other way?
Something like "offset list" for OSPF.
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:54 GMT-3