Nexthop issue for BGP

From: san (san.study@gmail.com)
Date: Tue Apr 05 2005 - 06:16:53 GMT-3

• Next message: Jerry Hulbert: "Re: Help with simulating latency across two routers"
• Previous message: Brian McGahan: "RE: REFLXIVE access-list QUESTION"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi ,

Router R2 is learning BGP route which has a different next-hop as
compared to IGP learning. Requirement is R2 should run Sync mode &
advertise 200n/w to EBGP Router R6.

R5-----ospf area 2------R4--------ospf area 0---------R2
R5------IBGP AS5------------------------------------------R2----EBGP AS6-----R6

R5 has a loopback address 200.200.200.5/24 advertised in both BGP & OSPF.

How to over come the above problem ?

1. "no sync" can solve the problem, but its restricted.

2. policy Routing with route-map for 200n/w at R2 inbound.

3. Any other method ?

Thanks in Advance
San

• Next message: Jerry Hulbert: "Re: Help with simulating latency across two routers"
• Previous message: Brian McGahan: "RE: REFLXIVE access-list QUESTION"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:52 GMT-3