From: Jongsoo kim (bstrt2002@gmail.com)
Date: Mon Apr 04 2005 - 19:51:35 GMT-3
Thanks Bruce
Now, I think I know most L2 methods you mentioned previously.
Jongsoo from RTP
On Apr 4, 2005 5:12 PM, Andrew B. Caslow <abcaslow@netmasterclass.net>
wrote:
>
> Jongsoo,
>
> Here is a sample PPPoE configuration courtesy of our mutual friend Alexei
> Sadovnikov.
>
> HTH and Good Luck tomorrow!
>
> -Bruce
>
> R2 ======================== R1 ======================== R6
>
> Ethernet Connection ATM Connection
>
> R2 is acting as a PPPoE client
>
> R1 is acting as nothing but a bridging pass-through device
>
> R6 is acting as a PPPoE server
>
> R2###################################################
>
> R2## #
>
> R2## Basic PPPoE over Ethernet #
>
> R2## with pre-configured IPs #
>
> R2###################################################
>
> !
>
> vpdn enable
>
> !
>
> vpdn-group 1
>
> request-dialin
>
> protocol pppoe
>
> !
>
> interface FastEthernet0/0
>
> description PPPoE client side interface
>
> no ip address
>
> duplex auto
>
> speed auto
>
> pppoe enable
>
> pppoe-client dial-pool-number 1
>
> !
>
> interface Dialer1
>
> ip address 172.16.26.2 <http://172.16.26.2/>
255.255.255.0<http://255.255.255.0/>
>
> ip mtu 1492
>
> encapsulation ppp
>
> dialer pool 1
>
> dialer-group 1
>
> no peer neighbor-route
>
> !
>
> dialer-list 1 protocol ip permit
>
> R1###################################################
>
> R1## #
>
> R1## Basic PPPoE over Ethernet #
>
> R1## with pre-configured IPs #
>
> R1###################################################
>
> !
>
> interface FastEthernet0/0
>
> no ip address
>
> bridge-group 1
>
> !
>
> !
>
> interface ATM3/0
>
> no ip address
>
> !
>
> interface ATM3/0.1 point-to-point
>
> pvc 100/100
>
> broadcast
>
> !
>
> bridge-group 1
>
> !
>
> bridge 1 protocol ieee
>
> ##################################################
>
> R6## #
>
> R6## Basic PPPoE over Ethernet #
>
> R6## with pre-configured IPs #
>
> R6###################################################
>
> !
>
> hostname R6
>
> !
>
> vpdn enable
>
> !
>
> vpdn-group 1
>
> accept-dialin
>
> protocol pppoe
>
> virtual-template 1
>
> !
>
> interface ATM3/0
>
> no ip address
>
> no atm ilmi-keepalive
>
> !
>
> interface ATM3/0.1 multipoint
>
> pvc 100/100
>
> encapsulation aal5snap
>
> protocol pppoe
>
> !
>
> interface Virtual-Template1
>
> ip address 172.16.26.6 <http://172.16.26.6/>
255.255.255.0<http://255.255.255.0/>
>
> ip mtu 1492
>
> no ip route-cache same-interface
>
> no peer neighbor-route
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:52 GMT-3