From: Jim (quangnn@hptvietnam.com.vn)
Date: Mon Apr 04 2005 - 02:59:59 GMT-3
^$
----- Original Message -----
From: "mani poopal" <mani_ccie@yahoo.com>
To: "ccie" <ccie@gannons.net>; <my-ccie-test@libero.it>
Cc: <ccielab@groupstudy.com>
Sent: Monday, April 04, 2005 12:22 PM
Subject: Re: quickly as-path regexp question
> Hi,
>
> Assume your as is AS#4 and peer is in AS#254 and peer ip address is
> 150.100.1.54. And below config should ok for your requirement
> ================================
> ip as-path access-list 11 permit ^4$
> router bgp 4
> neighbor 150.100.1.54 filter-list 11 out
> ================================
> even ip as-path access-list 11 permti ^$ should work
>
> thanks
>
> Mani
>
> ccie <ccie@gannons.net> wrote:
> ^$
>
> Regards
>
>>How can I make a filter to an external peer allowing only route generate
>>in my own AS?
>>
>>thanks
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
> (416)431 9929
> MANI_CCIE@YAHOO.COM
>
>
> ---------------------------------
> Post your free ad now! Yahoo! Canada Personals
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:52 GMT-3