From: Steller, Keith (Keith.Steller@wellsfargo.com)
Date: Sat Apr 02 2005 - 00:28:53 GMT-3
Hi All-
Anyone have any advice on this issue other than a call to TAC and RMA?
Thanks in advance!
Keith
cat1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I9Q3L2-M), Version 12.1(19)EA1c, RELEASE
SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 03-Feb-04 04:47 by yenanh
Image text-base: 0x00003000, data-base: 0x0069B5C0
ROM: Bootstrap program is C3550 boot loader
cat1 uptime is 1 minute
System returned to ROM by power-on
System image file is
"flash:c3550-i9q3l2-mz.121-19.EA1c/c3550-i9q3l2-mz.121-19.EA1c.bin"
cisco WS-C3550-24 (PowerPC) processor (revision L0) with 65526K/8192K bytes
of memory.
Processor board ID CAT0809X12R
Last reset from warm-reset
Running Layer2/3 Switching Image
Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
FastEthernet0/1 failed POST
FastEthernet0/2 failed POST
FastEthernet0/3 failed POST
FastEthernet0/4 failed POST
FastEthernet0/5 failed POST
FastEthernet0/6 failed POST
FastEthernet0/7 failed POST
FastEthernet0/8 failed POST
FastEthernet0/9 failed POST
FastEthernet0/10 failed POST
FastEthernet0/11 failed POST
FastEthernet0/12 failed POST
Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
FastEthernet0/17 failed POST
FastEthernet0/18 failed POST
FastEthernet0/19 failed POST
FastEthernet0/20 failed POST
FastEthernet0/21 failed POST
FastEthernet0/22 failed POST
FastEthernet0/23 failed POST
FastEthernet0/24 failed POST
FastEthernet0/13 failed POST
FastEthernet0/14 failed POST
FastEthernet0/15 failed POST
FastEthernet0/16 failed POST
Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface
GigabitEthernet0/1 failed POST
Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface
GigabitEthernet0/2 failed POST
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:51 GMT-3