Re: GRE tunnel for Frame-relay [bcc][faked-from]

From: Ed Lui (edwlui@gmail.com)
Date: Fri Apr 01 2005 - 17:37:12 GMT-3


Jongsoo,

I looked at your question the same way like Marvin. I think this link
should answer your question.
http://www.internetworkexpert.com/resources/compound.frame-relay.htm

HTH,
Edward

On Apr 1, 2005 12:27 PM, Jongsoo kim <bstrt2002@gmail.com> wrote:
> Marvine and group
>
> Sorry I wasn't too clear.
> What I am looking for is Frame-relay over GRE tunnel.
>
> R1---FR-PVC 101-----S0/0 R2-----GRE-tunnel----------R3-S0/0-----F/R201-----R4
>
> Basically R1 and R4 needs to be directly connected via F/R.
> R2 and R3 need to act as F/R SW.
>
> I think config has something to do with
> R2 and R3 should be F/R DCE and frame-relay switching on.
>
> R2
> In s0/0
> frame-relay route 101 interface tunnel 0 201
>
> R3
> In s0/0
> frame-relay route 201 interface tunnel 0 101
>
> I can't be so sure though.
>
> Can someone confirm it if you're done it "L2 over GRE" before?
>
> Thanks
>
>
> Jongsoo
>
>
> On Apr 1, 2005 2:17 PM, marvin greenlee <marvin@ccbootcamp.com> wrote:
> > R1
> > interface Tunnel1
> > ip unnumbered Serial0/0
> > tunnel source Serial0/0
> > tunnel destination 12.12.12.2
> >
> > interface Serial0/0
> > ip address 12.12.12.1 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 12.12.12.2 102 broadcast
> >
> > R2
> > interface Tunnel1
> > ip unnumbered Serial0/0
> > tunnel source Serial0/0
> > tunnel destination 12.12.12.1
> >
> > interface Serial0/0
> > ip address 12.12.12.2 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 12.12.12.1 201 broadcast
> >
> > Marvin Greenlee, CCIE#12237, CCSI# 30483
> > Network Learning Inc
> > marvin@ccbootcamp.com
> > www.ccbootcamp.com (Cisco Training)
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Jongsoo kim
> > Sent: Friday, April 01, 2005 11:12 AM
> > To: ccielab@groupstudy.com
> > Subject: GRE tunnel for Frame-relay [bcc][faked-from]
> > Importance: Low
> >
> > Group
> >
> > How do I configure GRE tunnel for Frame-relay?
> >
> > Show me some sample config.
> >
> > Thanks
> >
> > Jongsoo
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:51 GMT-3