From: Dillon Yang (gzdillon@hotmail.com)
Date: Tue Mar 29 2005 - 08:40:36 GMT-3
Hi, zahid:
Your topology is not readable, send your config, please.
dillon
----- Original Message -----
From: "zahid" <zahid@jeel.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, March 29, 2005 8:26 AM
Subject: redistribution----> Routing Loop
> Hi Guys,
>
> I need your help I am facing small problem in redistribution of RIP-OSPF
> -EIGRP-OSPF.
>
> RIP-e0 (R1)-e1-ospf A39----e1(R2)
>
> / \
>
> / FR\
>
> / A0 \
>
> (R3) (R4)
>
> |_EIGRP_|
>
> R1 running RIP on e0 and OSPF on e1 (Mutual redistribution)
>
> R2 running OSPF area 0 on FR and area 39 on Ethernet (R2 have multipoint
> sub-interface for FR)
>
> R3 running OSPF on FR and EIGRP on Ethernet. (Mutual redistribution) with
> out route-Map
>
> R4 running OSPF on FR and EIGRP on Ethernet. (Mutual redistribution) with
> out route-Map
>
> when IGP complete the loop is coming into the picture, which
> roots(prefix) was redistributed from the RIP into OSPF , R1 is learning
> these prefixes from the R2 Ethernet and on R3 these prefixes is coming
> from R4 FR interface.
>
> What are the methods to solve this problem?
>
> I tried a lot but hard luck.
>
> Kindest Regards
>
> Muhammad.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:53 GMT-3