From: John Matus (john_matus@hotmail.com)
Date: Tue Mar 29 2005 - 01:07:57 GMT-3
ok, here is the situation.
i go to enable area authtication for 3 router connected in hub-and-spoke
topology. the config is as follows:
all router:
router os 1
area 1 authen message-digest
int s0/0
ip o message-digest-key 1 md5 cisco
key chan cisco
key 1
key-string cisco
so i've done that on the hub and one of the spokes, and the adjacencies of
those 2 routers go down and up as i input the interface level commands, but
the other spoke that is only configured with the area authentication and no
the interface level authentication STILL maintains its adjacency. why
exactly is that???? my expectation is that it would go down and stay down
untill i've configured the interface level authentication...............or
am i wrong (probably)....
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:53 GMT-3