From: Morakinyo H. Salami (msalami@du.edu)
Date: Thu Mar 24 2005 - 10:10:51 GMT-3
Hi,
With the Policy map, and considering the fact that you have your clients on the switch, it would be best if you have the policy map on the input of the switch port.
----- Original Message -----
From: Budak Timuralp <btimuralp@sgstelecom.com>
Date: Thursday, March 24, 2005 10:58 am
Subject: 3750 rate limit
> Hi all,
>
>
>
> We are giving data service to our customers from a 3750 switch. We
> want to
> restrict them to a specific bandwidth. And we are using IOS
> version C3750
> Software (C3750-I5-M), Version 12.2(25)SEA,.
>
>
>
> The usual rate-limit command seemed to be not working although I
> couldn'tsee the command in the Unsopported command page of IOS
> 12.2(25)SEA.
>
> We also try to limit with policy-maps but we couldn't apply it as
> an output
> to an ethernet port.
>
>
>
> I have done bandwidth limiting many times on routers and cisco
> 3550 switches
> but never had a problem like this.
>
>
>
> Anyone tried that before on a 3750?
>
>
>
>
>
> Regards,
>
>
>
> Budak Timuralp
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:51 GMT-3