From: Arif Rahman (arahman@cisco.com)
Date: Wed Mar 23 2005 - 21:48:51 GMT-3
Hi
thank you for reply. I have visited that site also. I did not understand
complete example. For example 10.88.194.17 and 10.88.194.18 is physical
interface address or HSRP address is not clear. Under "ip nat Stateful id
2" below both address is 10.88.194.17. That does not make sense. Do have
any idea?
Configuration Examples for SNAT
This section provides the following configuration example:
Configuring SNAT with HSRP
Configuring SNAT Primary/Backup
Configuring SNAT with HSRP
!
ip nat Stateful id 1
redundancy SNATHSRP
mapping-id 10
ip nat pool SNATPOOL1 11.1.1.1 11.1.1.9 prefix-length 24
ip nat inside source route-map rm-101 pool SNATPOOL1 mapping-id 10 overload
ip classless
ip route 11.1.1.0 255.255.255.0 Null0
no ip http server
ip pim bidir-enable
Configuring SNAT Primary/Backup
!
ip nat Stateful id 1
primary 10.88.194.17
peer 10.88.194.18
mapping-id 10
!
ip nat Stateful id 2
backup 10.88.194.17
peer 10.88.194.17
mapping-id 10
thank you - Arif
At 11:29 AM 3/24/2005 +1100, Richard Gallagher wrote:
>How about this:
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftsnat.htm
>
>* Rich Gallagher
>* CCIE #7211 - R&S, C&S
>
>
>Arif Rahman wrote:
>
>>Hello group
>>anyone can point me some links that describe NAT redundancy with
>>examples. I have following but looks like I can do same job without
>>"redundancy <HSRP_name>" at the end of "ip nat source....." command.
>>
>>http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087c4c.html
>>
>>
>>Thank you
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:51 GMT-3