PIX OSPF Authentication MD5

From: Michael Wong (generalccie@yahoo.com)
Date: Wed Mar 23 2005 - 14:26:45 GMT-3

• Next message: Brian Dennis: "RE: disable "more" in output"
• Previous message: Michael Wong: "RE: OSPF Non-broadcast network type"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I could not find commands under my PIX 515 to define the MD5 key for ospf authentication. My pix is running 6.3(3)
 
for example I could enter:
 
router ospf 1
network 1.1.1.0 255.255.255.0 area 2
area 2 authentication message-digest-key
 
 
But, I could not find something similar as "ip ospf mess 1 md5 cisco" to config on the PIX to assign the MD5 password for the link. Could anyone tell me where to config such?
 
thanks,
Michael

• Next message: Brian Dennis: "RE: disable "more" in output"
• Previous message: Michael Wong: "RE: OSPF Non-broadcast network type"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:50 GMT-3