From: Kevin Minihane (kevin.minihane@eirteic.com)
Date: Wed Mar 23 2005 - 07:10:02 GMT-3
Apologies for the Off-topic.
I have a Cisco 837 ADSL router, and am experiencing a few problems with it.
The DSL line (connected to ATM 0) keeps disconnecting, and I cant seem to
get it to reconnect automatically. Does anyone know of any way in which to
get the router to automatically reconnect my DSL connection?
Thanks in advance
show run
Building configuration...
Current configuration : 7663 bytes
!
! Last configuration change at 06:39:05 UTC Wed Mar 23 2005 by admin
!
version 12.3
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname xxxxxx
!
security authentication failure rate 3 log
security passwords min-length 6
logging count
logging buffered 52000 debugging
enable secret 5 $1$gO0.$gfGaOOT1tj8uYTLxrlwRZ.
!
username xxxxxx privilege 15 password
no aaa new-model
ip subnet-zero
no ip source-route
ip tcp synwait-time 10
no ip domain lookup
!
!
no ip bootp server
ip cef
ip audit notify log
ip audit po max-events 100
no ftp-server write-enable
!
!
!
!
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
!
crypto isakmp policy 2
encr 3des
hash md5
authentication pre-share
group 2
lifetime 28800
!
crypto isakmp policy 3
authentication pre-share
group 2
lifetime 28800
!
crypto isakmp policy 4
hash md5
authentication pre-share
group 2
lifetime 28800
crypto isakmp key 0 xxxxxxxxxx address xxxxxxxxxx
crypto isakmp key 0 xxxxxxxxxx address xxxxxxxxxx
!
!
crypto ipsec transform-set xxxxxxxx1 esp-3des esp-md5-hmac
crypto ipsec transform-set xxxxxxxx2 esp-3des esp-md5-hmac
!
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to xxxxxxxx
set peer xxxxxxxx
set security-association lifetime seconds 28800
set transform-set xxxxxxxx1
set pfs group2
match address 100
crypto map SDM_CMAP_1 2 ipsec-isakmp
description Tunnel to xxxxxxxx
set peer xxxxxxxx
set security-association lifetime seconds 28800
set transform-set xxxxxxxx2
set pfs group2
match address 102
!
!
!
!
interface Ethernet0
description $FW_INSIDE$$ETH-LAN$
ip address xxxxxxxx 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip route-cache flow
ip tcp adjust-mss 1452
no cdp enable
hold-queue 100 out
!
interface Virtual-Template1
no ip address
!
interface ATM0
mtu 1452
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
ip tcp adjust-mss 1452
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
no ip redirects
no ip unreachables
no ip proxy-arp
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface FastEthernet1
no ip address
duplex auto
speed auto
!
interface FastEthernet2
no ip address
duplex auto
speed auto
!
interface FastEthernet3
no ip address
duplex auto
speed auto
!
interface FastEthernet4
description VoIP Interface
no ip address
duplex auto
speed auto
!
interface Dialer0
description $FW_OUTSIDE$
ip address xxxxxxxx 255.255.255.248
ip access-group 103 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip nat outside
encapsulation ppp
ip route-cache flow
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxxxxx
ppp chap password 7 xxxxxxxx
ppp pap sent-username xxxxxxxx password 7 xxxxxxxx
crypto map SDM_CMAP_1
!
ip nat inside source route-map SDM_RMAP_1 interface Dialer0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http authentication local
no ip http secure-server
!
logging source-interface Ethernet0
logging xxxxxxxx
no cdp run
route-map SDM_RMAP_1 permit 1
match ip address 101
!
banner login ^C
Authorised access only.
This system is the property of XXXXXX.
Disconnect IMMEDIATELY if you are not an authorised user.
^C
!
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line vty 0 4
access-class 104 in
login local
transport input telnet
transport output telnet
!
scheduler max-task-time 5000
scheduler interval 500
sntp server 193.120.10.3
!
end
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:50 GMT-3