From: Michael Wong (generalccie@yahoo.com)
Date: Tue Mar 22 2005 - 03:14:18 GMT-3
Hi,
I have a hub-spoke frame relay cloud, the hub (R6) is multipoint subinterface, spokes (R7, R8) are physical interface. The OSPF network type is Non-broadcast. I have put neigh statements on hub router R6, and put ip ospf priority 0 on each spoke router frame interface. But R6 still can not form neighbor relationship with R8. Am I missing some config here?
R6#wr t
interface Serial0
no ip address
encapsulation frame-relay
interface Serial0.3 multipoint
ip address 167.78.86.1 255.255.255.248
frame-relay map ip 167.78.86.2 608 broadcast
frame-relay map ip 167.78.86.3 607 broadcast
router ospf 1
router-id 6.6.6.6
log-adjacency-changes
network 142.52.0.0 0.0.0.255 area 1
network 167.78.86.0 0.0.0.7 area 0
neighbor 167.78.86.3
neighbor 167.78.86.2
R6#sho ip ospf ne
Neighbor ID Pri State Dead Time Address Interface
7.7.7.7 0 FULL/DROTHER 00:01:41 167.78.86.3 Serial0.3
N/A 0 ATTEMPT/DROTHER - 167.78.86.2 Serial0.3
R8#wr t
interface Serial0/0
ip address 167.78.86.2 255.255.255.248
encapsulation frame-relay
ip split-horizon
ip ospf priority 0
frame-relay map ip 167.78.86.1 806 broadcast
frame-relay map ip 167.78.86.3 806 broadcast
router ospf 1
router-id 8.8.8.8
log-adjacency-changes
network 167.78.86.0 0.0.0.7 area 0
R8#sho ip ospf ne
Neighbor ID Pri State Dead Time Address Interface
6.6.6.6 1 INIT/DROTHER 00:01:04 167.78.86.1 Serial0/0
R7#wr t
interface Serial0/0
ip address 167.78.86.3 255.255.255.248
encapsulation frame-relay
ip split-horizon
ip ospf priority 0
frame-relay map ip 167.78.86.1 706 broadcast
frame-relay map ip 167.78.86.2 706 broadcast
!
router ospf 1
router-id 7.7.7.7
log-adjacency-changes
network 167.78.86.0 0.0.0.7 area 0
R7#sho ip osp ne
Neighbor ID Pri State Dead Time Address Interface
6.6.6.6 1 FULL/DR 00:01:34 167.78.86.1 Serial0/0
---------------------------------
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:49 GMT-3