From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Mar 20 2005 - 22:21:19 GMT-3
The NM-4T module is not supported on the 2600 platform as per Cisco.
You may have been thinking of the NM-4A/S module.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Lukasz Bromirski
Sent: Sunday, March 20, 2005 2:11 PM
To: ccie2004@excite.com
Cc: ccielab@groupstudy.com
Subject: Re: 2600 Non-XM Routers
Ned wrote:
> Thx for your reply but don't the WIC-2T use the smart serial cables. I
> am looking to reuse the same DB-60 cables that I used on the 2500. I
> think the WIC-1T do use that cable but that would mean that I would have
> to use both WIC slots leaving only one NM slot left. Please advise if
> that is correct. Thx
Yes, this is correct. On the other way, there was a NM-4T module,
with four DB-60 serial connectors, which would leave You with two
spare WIC slots.
-- this space was intentionally left blank | Eukasz Bromirski you can insert your favourite quote here | lukasz:bromirski,net
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:48 GMT-3