From: Ned (ccie2004@excite.com)
Date: Sun Mar 20 2005 - 18:15:27 GMT-3
Hi Eukasz, Thx for your reply but don't the WIC-2T use the smart serial cables. I am looking to reuse the same DB-60 cables that I used on the 2500. I think the WIC-1T do use that cable but that would mean that I would have to use both WIC slots leaving only one NM slot left. Please advise if that is correct. Thx--- On Sun 03/20, =?UTF-8?B?xYF1a2FzeiBCcm9taXJza2k=?= < lbromirski@mr0vka.eu.org > wrote:From: =?UTF-8?B?xYF1a2FzeiBCcm9taXJza2k=?= [mailto: lbromirski@mr0vka.eu.org]To: ccie2004@excite.com, ccielab@groupstudy.comDate: Sun, 20 Mar 2005 20:39:58 +0100Subject: Re: 2600 Non-XM RoutersNed wrote:> Hi All, Do the 2600 NON XM series routers support Fast Ethernet> interfaces.Yes. Only 2610/2611 have Ethernet ports, the 2620 and higherhave FastEthernets.> I haven't been able to find documentation on cisco's website which> gives details.Here it is:http://www.cisco.com/en/US/products/hw/routers/ps259/products_installation_guide_chapter09186a008007e034.html&!
gt; Also, what interface on the 2600 series is equivalent to the 2500> series serial interfaces. I need to spec out a router which has 2> serial interfaces, 2 Fast Ethernet interfaces and Voice modules> if possible.The 2600 don't have any serial interfaces built-in as the 2500 series.You'll need additional WIC-2T card for two serial interfaces. Voicehas to go as an NM-1V/NM-2V, or higher density cards, can alsobe terminated on VWIC-1MFT-E1/VWIC-2MFT-E1 if You insert theAIM-VOICE-30 card into the motherboard.-- this space was intentionally left blank | Eukasz Bromirskiyou can insert your favourite quote here | lukasz:bromirski,net
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:48 GMT-3