From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Mar 20 2005 - 16:35:53 GMT-3
Rack1R1#terminal length ?
<0-512> Number of lines on screen (0 for no pausing)
Rack1R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1R1(config)#line con 0
Rack1R1(config-line)#length ?
<0-512> Number of lines on screen (0 for no pausing)
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
khalid mehmood
Sent: Sunday, March 20, 2005 11:32 AM
To: Cisco certification
Subject: disable "more" in output
Hi,
Is it possible to disable 'more' in the show command outputs.
Like if i say show ip route and if there are more than 24 lines in the
output
it should just spit it out
KM
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:48 GMT-3