From: Danshtr (danshtr@gmail.com)
Date: Sun Mar 20 2005 - 04:04:26 GMT-3
you can use distance command.
On Sat, 19 Mar 2005 12:19:23 -0800, khalid mehmood <kmehmood@shaw.ca> wrote:
> so this means that if i have to do redistribution at more that one point
> with one protocol as isis , i cannot use the tag method.
>
> wat else is possible?
>
> ----- Original Message -----
> From: "Matt" <matt_ccie_2004@yahoo.com>
> To: "khalid mehmood" <kmehmood@shaw.ca>; <ccielab@groupstudy.com>
> Sent: Saturday, March 19, 2005 12:04 PM
> Subject: Re: tags in isis
>
> > Not supported in 12.2
> >
> >
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_2/gtisitag.htm#1027129
> >
> >
> > -Matt
> >
> >
> >
> > --- khalid mehmood <kmehmood@shaw.ca> wrote:
> > > How can one see the assigned tags in isis??
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Small Business - Try our new resources site!
> > http://smallbusiness.yahoo.com/resources/
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Best regards, Dan
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:48 GMT-3