From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Sun Mar 20 2005 - 02:39:45 GMT-3
Typically, the DCE is configured on the FR switch simulating the service
provider.
In a rack rental situation, it is determined by how the cross over cable is
connected.
It is really nothing to be concerned with. Just know that it is the DCE
that is providing clock.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Dillon Yang
Sent: Saturday, March 19, 2005 9:22 PM
To: Group Study
Subject: DTE on FR switch
Hi, group:
I know it is a stupid question, but I want somebody to clarify it.
I just did a rental lab and found the FR switch does not work when I pasted
the initial config provided by the vendor. Then I entered command "show
control serial xxx" and got all messages with "DTE" on the FR switch and
"DCE" on the normal FR routers.
So, can DTE link be used on the FR switch?
TIA
dillon
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:48 GMT-3