Access List Configuration

From: Noble (noble@inserviceindia.com)
Date: Sat Mar 19 2005 - 18:02:47 GMT-3

Hi,
 
Can anyone help me in configuring the following access-list?
 
172.17.59.64/28
        |
        S0
        |
        R5
        |
        E0
        |
    VLAN50
        |
172.17.59.80/28
        
 
Configure an inbound access list called INBOUND on R5 S0 that satisfies
following.
 
1. Telnet sessions are permitted only if originated from ip addresses whose
last octet is odd number.
2. FTP Sessions are permitted only if established from R5's E0 subnet.
3.TFTP, SMTP and WWW are permitted both ways.
4. Allow pings from anywhere.
5.Confirm connectivity after applying the access list. Verify that a telnet
to R5's E0 from r2's S0/0 fails but a telnet from R2's Fa0/0 works.
6. Ensure that routing and DLSw+ works while explicitly denying all other
traffic.
 
Any suggestion will be highly appreciated.
 
Thanks,
 
Noble

This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:48 GMT-3