From: Pat Chui (cui666@gmail.com)
Date: Fri Mar 18 2005 - 20:42:52 GMT-3
I've never used direct telnet to termserver's lines b4, it really
works for me now, thanks Brian. I guess "it won't hurt to ask" :)
> > On Fri, 18 Mar 2005 17:10:36 -0500, Brian Dennis
> > <bdennis@internetworkexpert.com> wrote:
> > > Pat,
> > > First off, the access server is preconfigured for you. Secondly
> > > if you have multiple telnet sessions open directly to the access
> > > server's lines (i.e. TCP port 2001, 2002, etc), will it matter how many
> > > VTY lines you have configured on the router?
> > >
> > > Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> > >
> > > bdennis@internetworkexpert.com
> > > Internetwork Expert, Inc.
> > > http://www.InternetworkExpert.com
> > > Toll Free: 877-224-8987
> > > Direct: 775-745-6404 (Outside the US and Canada)
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > > Pat Chui
> > > Sent: Friday, March 18, 2005 1:47 PM
> > > To: ccielab@groupstudy.com
> > > Subject: TermServer Access
> > >
> > > All,
> > > I am assuming that you can open multiple sessions for each of the
> > > routers in the lab? (5 at least as as termserver's vty is 0-4), so you
> > > don't have to suspend one and then jump to another ...so on and so
> > > forth. Do you have to configure the termserver during lab?
> > >
> > > Thanks,
> > > Pat
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:47 GMT-3