From: Walker, James - Is (JWALKER2@PARTNERS.ORG)
Date: Wed Mar 16 2005 - 13:53:05 GMT-3
5500 is the 13 slot chassis and slot 13 is set up to accept a LS1010.
You can not slot a LS1010 into a 5505.
Original messgae of this email started out with a question from Stuart if his
company's 5500 will work as an ATM switch.
Where are you going with your question?
-----Original Message-----
From: Dillon Yang [mailto:gzdillon@hotmail.com]
Sent: Wednesday, March 16, 2005 11:43 AM
To: Walker, James - Is
Cc: Group Study
Subject: Re: Cat5500 ATM Equipment
Hi, Walker:
Really? Can you explain why his Catalyst 5513 (WS-C5500) can work?
They are both 5500 cat. I want to set command as PVC, SVC though just one
device.
TIA
dillon
----- Original Message -----
From: "Walker, James - Is" <JWALKER2@PARTNERS.ORG>
To: "Dillon Yang" <gzdillon@hotmail.com>
Cc: "Group Study" <ccielab@groupstudy.com>
Sent: Thursday, March 17, 2005 12:39 AM
Subject: RE: Cat5500 ATM Equipment
This is not an ATM Switch. What is an NSAP address and what is an IP address?
What layers do you think they operate?
-----Original Message-----
From: Dillon Yang [mailto:gzdillon@hotmail.com]
Sent: Wednesday, March 16, 2005 11:19 AM
To: Walker, James - Is
Cc: Group Study
Subject: Re: Cat5500 ATM Equipment
Hi, Walker:
How about this? I can set nsap address, not IP address.
Console> (enable) show ver
WS-C5505 Software, Version McpSW: 6.4(3) NmpSW: 6.4(3)
Copyright (c) 1995-2003 by Cisco Systems
NMP S/W compiled on Apr 10 2003, 18:09:59
MCP S/W compiled on Apr 10 2003, 18:04:05
System Bootstrap Version: 5.1(2)
Hardware Version: 1.0 Model: WS-C5505 Serial #: 066559889
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
1 2 WS-X5530 014359411 Hw : 3.3
Fw : 5.1(2)
Fw1: 4.4(1)
Sw : 6.4(3)
WS-F5531 014379117 Hw : 2.0
WS-U5531 007438043 Hw : 1.1
2 1 WS-X5302 007460098 Hw : 7.6
Fw : 20.22
Fw1: 3.1(1)
Sw : 12.0(9)W5(17a)
3 12 WS-X5213 004982249 Hw : 1.3
Fw : 1.4
--More-- Sw : 6.4(3)
4 1 WS-X5155 002188660 Hw : 1.0
Fw : 1.2
Fw1: 1.320
Sw : 3.2
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 32768K 21189K 11579K 8192K 6047K 2145K 512K 185K 327K
Uptime is 0 day, 0 hour, 54 minutes
ATM(lane-config-database)#name el01 ?
local-seg-id local segment number for this emulated TR LAN
new-name introduce the new name for this elan
restricted make this elan closed to access by name only
server-atm-address the les-nsap address for this elan
un-restricted make this elan open to access by name only
ATM(lane-config-database)#name el01 ser
ATM(lane-config-database)#name el01 server-atm-address ?
Server (LES) ATM address for this elan
ATM(lane-config-database)#name el01 server-atm-address
4.??0000000E04FA$erver-atm-
address 47.00918100000000E04FAC
B401.0010address
ATM#s run
Building configuration...
Current configuration:
!
version 11.2
!
hostname ATM
!
!
!
lane database yang
name el01 server-atm-address 47.00918100000000E04FACB401.00100DAACC41.01
!
interface ATM0
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
!
!
line con 0
line vty 0 4
no login
!
end
TIA
dillon
----- Original Message -----
From: "Walker, James - Is" <JWALKER2@PARTNERS.ORG>
To: <Stuart.Juggins@computacenter.com>; <ccielab@groupstudy.com>
Sent: Thursday, March 17, 2005 12:01 AM
Subject: RE: Cat5500 ATM Equipment
> Yes
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Stuart.Juggins@computacenter.com
> Sent: Wednesday, March 16, 2005 10:50 AM
> To: ccielab@groupstudy.com
> Subject: Cat5500 ATM Equipment
>
>
> Hi guys,
>
> I've been offered the following equipment by my company to practice ATM
> on, will this be ok. I think so but want to double check :-
>
> 1 x Catalyst 5513 (WS-C5500) with:-
> 1 x Supervisor IIIG (WS-X5550)
> 1 x WS-X5234-RJ45
> 1 x C5500 ATM-FIM (WS-X5165)
> 1 x L1010-ASP-B-FC1
> 1 x WATM-CAM-2P
> 1 x WAI-OC3-MM
>
> 2 x NM-1A-OC3MM (already have some 3600's they can go in)
>
> Also the cables are just normal MM fibre aren't they?
>
> TIA,
> Stuart.
>
>
> COMPUTACENTER (UK) LTD
>
> The contents of this e-mail are intended for the named addressee only.
> It contains information which may be confidential and which may also be
> privileged.
> Unless you are the named addressee (or authorised to receive for the
addressee)
> you may not copy or use it, or disclose it to anyone else.
>
> If you received it in error please notify us immediately and then destroy it.
>
> Computacenter information is available from http://www.computacenter.com
>
> This footnote also confirms that this email message has been swept for the
> presence of computer viruses.
>
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
> * * * * * * * * * * * *
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:46 GMT-3