From: Dillon Yang (gzdillon@hotmail.com)
Date: Tue Mar 15 2005 - 20:56:04 GMT-3
Hi, gladston:
There is not a command "dialer remote-name" in config of r5. Maybe it stops the callback activing the call.
HTH
dillon
----- Original Message -----
From: <gladston@br.ibm.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, March 16, 2005 5:15 AM
Subject: PPP Callback with dialer interface
> Would you see any problem with this PPP Callback with dialer interface configuration?
>
> Without Callback it works perfectly.
>
> r2
>
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 25 min-link 1
> isdn switch-type basic-ni
> isdn spid1 0835866101
> isdn spid2 0835866301
> !
> interface Dialer25
> ip address 172.16.25.2 255.255.255.0
> encapsulation ppp
> dialer pool 25
> dialer remote-name r5
> dialer string 8358662 class Callback
> dialer string 8358664 class Callback
> dialer load-threshold 3 outbound
> dialer callback-secure
> dialer-group 1
> no cdp enable
> ppp callback accept
> ppp authentication chap
> ppp multilink
> !
> map-class dialer Callback
> dialer callback-server username
>
> r5
>
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 25
> isdn switch-type basic-ni
> isdn spid1 0835866201
> isdn spid2 0835866401
> !
> interface Dialer25
> ip address 172.16.25.5 255.255.255.0
> encapsulation ppp
> dialer pool 25
> dialer idle-timeout 60
> dialer wait-for-carrier-time 10
> dialer string 8358661
> dialer string 8358663
> dialer-group 1
> ppp callback request
> ppp authentication chap
> ppp multilink
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:46 GMT-3