From: gladston@br.ibm.com
Date: Tue Mar 15 2005 - 17:10:16 GMT-3
This is the result of configuring 'ppp multilink' and 'dialer load-threshol 3'.
Why sometimes it shows connected to "8358661" on both channels and sometimes it shows different numbers?
This is an example where it show different numbers:
r5#sh dialer
BRI0/0 - dialer type = ISDN
Dial String Successes Failures Last DNIS Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI0/0:1 - dialer type = ISDN
Idle timer (60 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial reason: ip (s=172.16.25.5, d=172.16.25.2)
Interface bound to profile Di25
Current call connected 00:00:44
Connected to 8358663 (r2)
BRI0/0:2 - dialer type = ISDN
Idle timer (60 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is multilink member
Interface bound to profile Di25
Current call connected 00:00:11
Connected to 8358661 (r2)
Di25 - dialer type = DIALER PROFILE
Load threshold for dialing additional calls is 3
Idle timer (60 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Number of active calls = 2
Dial String Successes Failures Last DNIS Last status
8358661 0 1 01:21:47 failed Default
8358663 1 0 00:00:51 successful Default
r5#
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:46 GMT-3