From: Nathasha Aleyevka (naleyevka@yahoo.com)
Date: Tue Mar 08 2005 - 16:24:46 GMT-3
Check your K values.
simon hart <simon.hart@btinternet.com> wrote:Brian,
Here are the configs
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname terminal_bb1
!
enable password CISCO
!
username ROUTER6 password 0 CISCO
ip subnet-zero
ip tcp intercept list TCP
ip tcp intercept max-incomplete low 500
ip tcp intercept max-incomplete high 1000
ip tcp intercept mode watch
no ip domain-lookup
ip host R4 2004 1.1.1.1
ip host R5 2005 1.1.1.1
ip host r2 2007 1.1.1.1
ip host r6 2006 1.1.1.1
ip host bb1 2007 1.1.1.1
ip host R1 2001 1.1.1.1
ip host r3 2003 1.1.1.1
ip host cat 2002 1.1.1.1
ip host BB3 2008 1.1.1.1
!
ip accounting-threshold 50000
!
key chain EIGRP
key 1
key-string CISCO
!
!Loads of Loopbacks - cut out from the config
!
interface Serial0
ip address 54.1.1.254 255.255.255.0
clock rate 64000
!
interface Serial1
description HDLC link to BB3 for BGP Peering
ip address 172.16.4.1 255.255.255.0
clock rate 64000
!
router eigrp 100
network 54.1.1.254 0.0.0.0
network 54.1.4.254 0.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
router ospf 100
log-adjacency-changes
network 132.1.0.2 0.0.0.0 area 0
!
router rip
version 2
network 192.168.0.0
network 212.18.0.0
network 212.18.1.0
network 212.18.2.0
network 212.18.3.0
no auto-summary
!
router bgp 54
no synchronization
bgp log-neighbor-changes
network 112.0.0.0
network 113.0.0.0
network 114.0.0.0 route-map SET_COMMUNITY_54
network 115.0.0.0 route-map SET_COMMUNITY_54
network 116.0.0.0
network 117.0.0.0
network 118.0.0.0
network 119.0.0.0
neighbor RACKS peer-group
neighbor RACKS remote-as 100
neighbor RACKS send-community
neighbor RACKS default-originate
neighbor RACKS route-map BGP_OUT out
neighbor 54.1.1.6 peer-group RACKS
neighbor 54.1.2.6 peer-group RACKS
neighbor 54.1.3.6 peer-group RACKS
neighbor 54.1.4.6 peer-group RACKS
neighbor 54.1.5.6 peer-group RACKS
neighbor 54.1.6.6 peer-group RACKS
neighbor 54.1.7.6 peer-group RACKS
neighbor 54.1.8.6 peer-group RACKS
neighbor 172.16.4.3 remote-as 54
neighbor 172.16.4.3 next-hop-self
neighbor 172.16.4.3 send-community
no auto-summary
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.0.1
ip route 204.12.1.0 255.255.255.0 172.16.4.3
ip http server
ip as-path access-list 1 permit ^$
ip pim bidir-enable
!
!
ip prefix-list BGP_PREPEND_1 seq 5 permit 112.0.0.0/8
ip prefix-list BGP_PREPEND_1 seq 10 permit 113.0.0.0/8
!
ip access-list standard EIGRP
permit 200.0.0.0 0.0.3.255
ip access-list standard RIP
permit 212.18.0.0 0.0.3.0
!
ip access-list extended TCP
permit tcp any host 167.1.4.119 eq www
route-map SET_COMMUNITY_54 permit 10
set community 54
!
route-map BGP_OUT permit 10
match ip address prefix-list BGP_PREPEND_1
set as-path prepend 50 60
!
route-map BGP_OUT permit 10000
match as-path 1
!
line con 0
exec-timeout 0 0
line 1 8
no exec
transport input all
line aux 0
modem InOut
transport input all
speed 38400
line vty 0 4
password CISCO
login
!
ntp authentication-key 1 md5 02252D682829 7
ntp master 4
end
And for the other router...........................
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Rack1R6
!
logging queue-limit 100
enable password cisco
!
ip subnet-zero
!
!
no ip domain lookup
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
interface Loopback0
ip address 150.1.6.6 255.255.255.0
!
interface Ethernet0/0
ip address 156.1.67.6 255.255.255.0
half-duplex
!
interface Ethernet0/0.52
!
interface Serial0/0
ip address 54.1.1.6 255.255.255.0
!
interface BRI0/0
no ip address
shutdown
!
interface Dialer1
no ip address
!
router eigrp 10
network 54.1.1.6 0.0.0.0
network 54.1.4.6 0.0.0.0
network 156.1.6.6 0.0.0.0
network 156.1.67.6 0.0.0.0
metric weights 0 3 1 1 1 1
no auto-summary
!
ip http server
ip classless
!
!
call rsvp-sync
!
voice-port 1/0/0
!
voice-port 1/0/1
!
mgcp profile default
!
dial-peer cor custom
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
line vty 0 4
password cisco
login
!
!
end
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Brian
McGahan
Sent: 08 March 2005 19:06
To: simon hart; Group Study
Subject: RE: EIGRP problem
Simon,
Paste your full config for both of these devices.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> simon hart
> Sent: Tuesday, March 08, 2005 12:38 PM
> To: Group Study
> Subject: EIGRP problem
>
> Hi,
>
> I have a peculiar problem that I cannot seem to get to the bottom of.
>
> Two routers connected via a serial cable using HDLC
>
> R1---------------------R2
>
> R1 S0 ip address 54.1.1.6
>
> R2 S0 ip address 54.1.1.254
>
>
>
> EIGRP has been configured on both interfaces, however the two routers
do
> not
> become neighbors.
>
> I have looked at debug ip packet from router 2 and it is sending eigrp
> packets and recieving eigpr packets from router 1. Similar results
are
> seen
> on router 1.
>
> s=54.1.1.254 (local), d=224.0.0.10 (Serial0), len 60, sending
> broad/multicast
> 00:20:58: IP: s=54.1.1.6 (Serial0), d=224.0.0.10, len 60, rcvd 2
> 00:21:02: IP: s=54.1.1.254 (local), d=224.0.0.10 (Serial0), len 60,
> sending
> broad/multicast
> 00:21:03: IP: s=54.1.1.6 (Serial0), d=224.0.0.10, len 60, rcvd
2undebug
> all
>
> However if I debug eigrp packets I do not see that I am recieving any
> packets, only that I am sending them (again similar results seen on
router
> 1)
>
> 0:19:57: EIGRP: Sending HELLO on Serial0
> 00:19:57: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
> 00:20:01: EIGRP: Sending HELLO on Serial0
> 00:20:01: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
> 00:20:06: EIGRP: Sending HELLO on Serial0
> 00:20:06: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
> 00:20:10: EIGRP: Sending HELLO on Serial0
> 00:20:10: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
> 00:20:15: EIGRP: Sending HELLO on Serial0
>
> If I look at eigrp traffic this confirmed
>
> Hellos sent/received: 497/0
> Updates sent/received: 0/0
> Queries sent/received: 0/0
> Replies sent/received: 0/0
> Acks sent/received: 0/0
> Input queue high water mark 0, 0 drops
> SIA-Queries sent/received: 0/0
> SIA-Replies sent/received: 0/0
>
> Any suggestions on why this should be the case??
>
> Thanks
>
> Simon
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.6.4 - Release Date: 07/03/2005
>
>
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:43 GMT-3