From: crcerrors@gmail.com
Date: Sun Mar 06 2005 - 20:32:33 GMT-3
If I understand the question, try this link. Under the heading :
Configuring the Forwarding-Delay Time for a VLAN
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225se/3550scg/swstp.htm#wp1150580
HTH,
Bobby
On Sun, 6 Mar 2005 10:33:08 -0500, Jongsoo.Kim@intelsat.com
<Jongsoo.Kim@intelsat.com> wrote:
> Ollie
>
> Per CCO, spanning-tree vlan forward-time is the duration each state last.
> Since there are two states of listening and learning to go to forward.
> I would say 7 second so that 7 sec of listen and 7 sec of learning.
>
> Here is copy of CCO
>
> forward-time seconds
> Set the forward-delay time for the specified spanning-tree instance. The
> forwarding time determines how long each of the listening and learning
> states last before the interface begins forwarding. The range is 4 to 30
> seconds.
>
> Regards
>
> Jongsoo
>
> -----Original Message-----
> From: Oliver Grenham [mailto:ogrenham@optusnet.com.au]
> Sent: Sunday, March 06, 2005 11:25 AM
> To: ccielab@groupstudy.com
> Subject: configuring a port to forward in a given time
>
> Hi All,
>
> if a question asks to configure a particular port to goto a forwarding in
> say
> 14 seconds and to go through all states, how would you configure the
> spanning
> tree forward delay time?
>
> Shoud it be set to 14 seconds or perhaps 7 seconds as it has to go through
> the
> listening and learning states?
>
> Any help would be greatly appreciated.
>
> Ollie.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ############################################################
>
> Building on 40 Years of Leadership - As a global communications leader with 40 years of experience, Intelsat helps service providers,
> broadcasters, corporations and governments deliver information and entertainment anywhere in the world, instantly, securely and reliably.
>
> ############################################################
> This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged
> information. Any unauthorized review, use, disclosure or
> distribution is prohibited. If you are not the intended
> recipient, please contact the sender by reply email and
> destroy all copies of the original message. Any views
> expressed in this message are those of the individual
> sender, except where the sender specifically states them
> to be the views of Intelsat, Ltd. and its subsidiaries.
> ############################################################
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:42 GMT-3