From: azhar mumtaz (azharmumtaz2000@yahoo.com)
Date: Sun Mar 06 2005 - 02:32:13 GMT-3
Hi Folks:
I am currently working on the ATM section and my
virtual-access 2 is being shown as down. I have tried
shut down the main atm inter as well as the atm
sub-int. Also I first configured virtual-template 1
which created a virtual-access 1 and that is shown
here as up. I did shut the int virtual-template 1 ,
but the virtual-access is shown as up. Is there
someway I can remove the virtual-access1 ( I know we
cannot remove it directly, we have to go into
virtual-template 1, but I dont see any
virtual-template 1 in my config). Any help you can
provide here will be greatly appreciated.
Rack1R6#show ip int brief
Interface IP-Address OK? Method Status Protocol
ATM0/0 unassigned YES unset up up
ATM0/0.201 unassigned YES unset up up
FastEthernet1/0 unassigned YES unset up up
Virtual-Access1 unassigned YES unset up up
Virtual-Access2 unassigned YES unset down down
Virtual-Template2 54.1.7.6 YES manual down down
Virtual-Access3 unassigned YES unset up up
Loopback0 150.1.6.6 YES manual up up
interface ATM0/0
no ip address
no atm ilmi-keepalive
!
interface ATM0/0.201 point-to-point
pvc 0/201
encapsulation aal5snap
protocol ppp Virtual-Template2
!
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
!
interface Virtual-Template2
ip address 54.1.7.6 255.255.255.0
ppp authentication chap
ppp chap hostname Rack1R6
Thanks
Azhar
__________________________________
Celebrate Yahoo!'s 10th Birthday!
Yahoo! Netrospective: 100 Moments of the Web
http://birthday.yahoo.com/netrospective/
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:41 GMT-3