From: Mihai Petcu (mpetcu2004@yahoo.com)
Date: Wed Mar 02 2005 - 17:04:42 GMT-3
Roger,
Try configuring "ip route-cache flow" on the
serial interface and then use the "show ip cache flow"
command.
See sample output below :
R3#show ip cache flow
IP packet size distribution (0 total packets):
1-32 64 96 128 160 192 224 256 288 320
352 384 416 448 480
.000 .000 .000 .000 .000 .000 .000 .000 .000 .000
.000 .000 .000 .000 .000
512 544 576 1024 1536 2048 2560 3072 3584 4096
4608
.000 .000 .000 .000 .000 .000 .000 .000 .000 .000
.000
IP Flow Switching Cache, 278544 bytes
0 active, 4096 inactive, 0 ded
0 ager polls, 0 flow alloc failures
Active flows timeout in 30 minutes
Inactive flows timeout in 15 seconds
last clearing of statistics never
Protocol Total Flows Packets Bytes
Packets Active(Sec) Idle(Sec)
-------- Flows /Sec /Flow /Pkt
/Sec /Flow /Flow
SrcIf SrcIPaddress DstIf
DstIPaddress Pr SrcP DstP Pkts
HTH,
Mihai
--- "McNeace, Roger" <RMcNeace@ciena.com> wrote:
> Does anyone know of a Show command that will show
> packet distribution
> by packet size on a serial interface. I have no
> queueing or QOS on
> interface. I searched DOCCD to no avail. Thanks
>
>
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:39 GMT-3