From: kuldip singh (dipa.singh@gmail.com)
Date: Tue Mar 01 2005 - 10:55:34 GMT-3
Wayne,
Below is example of how to use the de-list:
The following example specifies that IP packets larger than 512 bytes
(including the 4-byte Frame Relay Encapsulation) will have the DE bit
set:
frame-relay de-list 1 protocol ip gt 512
On Tue, 1 Mar 2005 13:15:55 +0000, Wayne Bellward <wbellward@gmail.com> wrote:
> Hi,
>
> This is the first time i've actually posted a question, the archives
> have always been great in the past. I'm sure someone can help and it
> would be greatly appreciated.
>
> I'd like to set the discard eligible bit for ip on my standard frame
> relay interface and can't seem to find anything substantial on this or
> how to confirm it. I have a 2521 as my frame switch and am using frame
> route commands so I'm not even sure I can confirm any of the FRTS
> functions i configure.
>
> interface Serial0
> ip address 137.20.101.2 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf priority 0
> no fair-queue
> frame-relay interface-dlci 201
> end
>
> Any help or advise on this would be great.
>
> Many Thanks,
>
> Wayne
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:38 GMT-3