From: Dillon Yang (gzdillon@hotmail.com)
Date: Sun Feb 27 2005 - 09:02:44 GMT-3
Yes, the AUX is replacement of CON, if the relevant config "no login" or "login" and "password xxx" is valid.
To do it,
1.
If the router is blank that means no config, you can first access it by VTY from Ethernet ports or Serial ports after a Autoconfig occurs.
2.
If the router is configured, the only way is replace its Flash to clear its configuration, and go to step 1!
HTH
dillon
----- Original Message -----
From: "Artir Geci" <artirgeci@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 27, 2005 9:14 AM
Subject: Console port broken
> Hi Group,
>
>
> On one of my routers the console port is broken.
>
> Is there any other way to access the router?
>
> Someone mentioned to access through AUX port, if this is true, how does this
> work?
>
>
>
> Thanks in advance,
>
>
> Artir Geci
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:26 GMT-3