From: NGUYEN Trung (trung@vnsystem.net)
Date: Wed Feb 23 2005 - 16:23:16 GMT-3
Hi Tim
I think the diference is that:
Banner-exec is in global config mode and can't be turn off on a specific
line.
Exec-banner is on by default, if you turn it off, the MOTD is also be
disable.
But you can configure to turn off exec banner on specific line.
Trung@
----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "'Group Study'" <ccielab@groupstudy.com>
Sent: Monday, February 21, 2005 9:25 PM
Subject: banner-exec vs exec-banner vs banner incoming
> Hi guys,
>
> I just noticed that both of the above "exec" commands exist.
>
> If you read each commands description it's not hard to figure out which
> one
> to
> use, but, given how similar these 2 commands are, I suspect it will be
> easy
> to
> use the wrong under the pressure of trying to complete the lab with just
> 10
> minutes to go.
>
> What's more difficult, I think, is figuring out when to use banner
> incoming
> vs
> banner exec. To me, it seems they both do pretty much the same thing.
>
> Can someone show an example of how incoming banner is used vs banner exec?
>
> TIA, Tim
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:24 GMT-3