RSVP Question

From: Lee Donald (Lee.Donald@t-systems.co.uk)
Date: Wed Feb 23 2005 - 13:33:16 GMT-3

• Next message: Alexander Arsenyev (GU/ETL): "RE: RSVP Question"
• Previous message: kuldip singh: "Re: Discontiguous OSPF Area 0"
• Next in thread: Alexander Arsenyev (GU/ETL): "RE: RSVP Question"
• Maybe reply: Alexander Arsenyev (GU/ETL): "RE: RSVP Question"
• Maybe reply: Brian McGahan: "RE: RSVP Question"
• Maybe reply: Lee Donald: "RE: RSVP Question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I haven't used RSVP a lot and I'm confused about how you classify what type
of traffic will be subjected to RSVP.

This config is to reserve 128kbps for VOIP. Assuming that each call can
reserve up to 64kbps. Between Router5 & Router4

But I don't know where in the config voice traffic is marked for RSVP?

Here's my config,

ROUTER5
interface Serial0/0
 no fair-queue
 frame-relay class SHAPE
 frame-relay traffic-shaping
 ip rsvp bandwidth 128 64
!
interface Serial0/0.15 point-to-point
 
!
interface Serial0/0.245 multipoint
ip rsvp bandwidth 128 64

ROUTER4
interface Serial0/0
frame-relay class 405
 frame-relay traffic-shaping
 ip rsvp bandwidth 128 64

map-class frame-relay 405
 frame-relay cir 256000
 frame-relay mincir 192000
 frame-relay adaptive-shaping becn
 frame-relay fecn-adapt
 frame-relay fair-queue

dial-peer voice 1 voip
 req-qos guaranteed-delay

Can anybody help me?

Thanks in advance.

Lee.

• Next message: Alexander Arsenyev (GU/ETL): "RE: RSVP Question"
• Previous message: kuldip singh: "Re: Discontiguous OSPF Area 0"
• Next in thread: Alexander Arsenyev (GU/ETL): "RE: RSVP Question"
• Maybe reply: Alexander Arsenyev (GU/ETL): "RE: RSVP Question"
• Maybe reply: Brian McGahan: "RE: RSVP Question"
• Maybe reply: Lee Donald: "RE: RSVP Question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:24 GMT-3