From: marvin greenlee (marvin@ccbootcamp.com)
Date: Tue Feb 22 2005 - 16:45:53 GMT-3
The 12.2(27) would not include IPv6.
Depending on how many 2500s you have, you may want to consider moving a few
to a 12.2T IP Plus, which has support for IPv6, including OSPFv3, and you
would be able to practice IPv6. ISIS and TCP Intercept are the only
features that you would probably notice missing.
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
will.jones@zen.co.uk
Sent: Tuesday, February 22, 2005 7:04 AM
To: ccielab@groupstudy.com
Subject: 2500's and Enterprise Plus [bcc][faked-from]
Importance: Low
All,
Could anyone provide any clarity regarding the use of 2500s as lab
equipment. What Im trying to understand is the notion of the 2500 being no
use for the Lab. The reason I am confused is that I am running 12.2(24)
Enterprise Plus(c2500-js-l.122-24a) on all my 2500 routers and 12.2(27)
Enterprise Plus c2600-js-mz.122-27 on my 2600s. I could go to 12.2(27) on my
2500s but havent got round to it yet (havent needed to). So far, I have
been able to configure most scenarios I have come across with this code
train.
Could anyone elaborate on what technnologies are missing from the 12.2(27)
Enterprise Plus train for the 2500 that could specifically cause one to fail
the lab exam ?
Ive taken a look at the feature navigator for the 12.2(27) code between the
2500 and 2600 and notice that there are about 50 unique features contained
within the 2600 version, but from an initial glance it would seem that a
fair chunk of these features would possibly not be utilised within the lab
(Im going on whats in the contents of workbooks here).
cheers
will
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:24 GMT-3