From: David Duncon (david_ccie@hotmail.com)
Date: Mon Feb 21 2005 - 19:27:10 GMT-3
Hi Chuck,
Thanks for your advise. Yes , I have loaded 12.2 IP only on my R1 and she
now happily takes on MQC commands.
- Cheers
David.
>From: "Church, Chuck" <cchurch@netcogov.com>
>To: "David Duncon" <david_ccie@hotmail.com>,<ccielab@groupstudy.com>
>Subject: RE: MQC on version 12.0(7)T Router
>Date: Fri, 18 Feb 2005 08:33:45 -0600
>
>12.0.7T has a lot of bugs and also many vulnerabilities. If you can get
>by with just 12.2 IP only (not IP Plus), you can run that with 32 megs
>ram and 8mb flash. In fact, I've gotten this version to run on the
>2600s that shipped with 24 megs ram, although you might have to adjust
>the 'iomem' setting to free up processor memory. I'd try that first.
>
>
>Chuck Church
>Lead Design Engineer
>CCIE #8776, MCNE, MCSE
>Netco Government Services - Design & Implementation Team
>1210 N. Parker Rd.
>Greenville, SC 29609
>Home office: 864-335-9473
>Cell: 703-819-3495
>cchurch@netcogov.com
>PGP key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4371A48D
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>David Duncon
>Sent: Friday, February 18, 2005 3:58 AM
>To: ccielab@groupstudy.com
>Subject: MQC on version 12.0(7)T Router
>
>Hi Group,
>
>Is MQC configurable on 12.0(7)T Router ?
>
>I got a p2p connectivity between R1(running 12.0(7)T )and R2(running
>version
>12.2(16).And I need to configure both adaptive shaping becn to throttle
>back
>the out put to the mincir level as well as queueing(LLQ) to prioritize
>a
>specific kind of traffic on the PVC. That sounds straight forward , yeah
>?
>
>Now as with the modular Qos , on R1 , when I tried to apply reservation
>policy ( i.e. policy-map WAN-Data which has a child class-map which
>Citrix
>traffic was matched and bandwidth was being allocated with priority
>command)
>on to the frame-relay map-class with a service policy command, the
>system
>refused to take this command.
>
>
>Adaptive shaping was fine on R1 , but system did not allowed me tied
>down
>the Queuing (reservation policy) on to the shaping map-class with
>service
>policy command. So I could only do the shaping config leaving out my
>proposed LLQ for citrix traffic. And on R2 which is running on 12.2 (16)
>, I
>am having no problem and I can complete the proposed config with out any
>
>errors. Now when I wonder on why R1 did not take the proposed config ,
>the
>only older code on R1 came to my mind. Other thank that every thing else
>is
>pretty much same and they both are 2600 series routers.
>
>Unfortunately due to some reasons , I could not upgrade the memory on R1
>to
>12.2 (16) like R2 or newer versions.
>
>Thus , is there any way I can make MQC work on R1 with the current code
>?
>
>If the new code on R1 is only way , I am afraid I got to achieve the
>same
>result with Legacy Qos of PQ ?
>
>
>Cheers ,
>
>David.
>
>_________________________________________________________________
>Credit card. Apply now. 60 sec response. Must be over 18. AU only:
>http://ad.au.doubleclick.net/clk;11046970;10638934;f?http://www.anz.com/
>aus/promo/first0105ninemsn/default.asp
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:24 GMT-3