From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Fri Feb 18 2005 - 19:00:06 GMT-3
It is "transport output none" but not from the console! Try and telnet to r1
and then issue telnet 120.5.72.130, you'll see it works,
-- Richard
-----Original Message-----
From: Arif Rahman [mailto:arahman@cisco.com]
Sent: Friday, February 18, 2005 8:47 PM
To: ccielab@groupstudy.com
Subject: how to disable telnet client
Hi Group
I am trying to disable telnet client on router, ie nobody should be able to
telnet other device from router. Use of ACL is not allowed. I tried with
"transport output" command but no luck.
Also another question which line router use for telnet to other device. And
which line is used for http connection to router, I mean if I use web
browser to access router then router uses vty, aux, console or something
else?
r1#srb vty
line vty 0 4
transport output none
end
r1#120.5.72.130
Trying 120.5.72.130 ... Open
User Access Verification
Username: cisco
Password:
r2#exit
[Connection to 120.5.72.130 closed by foreign host]
r1#
thank you
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:22 GMT-3