From: Sundar Palaniappan (sundarp@gmail.com)
Date: Fri Feb 18 2005 - 13:34:00 GMT-3
Config you need on R1 is:
int f0/0
ip summary-address eigrp 100 172.168.0.0 255.255.252.0 90
ip summary-address eigrp 100 172.168.4.0 255.255.254.0 90
Hope this helps.
--Sundar Palaniappan
On Fri, 18 Feb 2005 11:16:12 -0500, joshua lauer <jslauer@hotmail.com> wrote:
> I was thinking the same way. Nathasha, this is interesting what scenario
> book are you using or is this one you made up? Just curious, I'm going to
> try it out. Right off hand cant think of anything other than modifying the
> distance on R1.
>
> josh
>
> Joshua Lauer
>
> RHCE, MCSE, CCNA, CCDA, CCDP, CCNP, CCIP, CCSP,INFOSEC, CEH
>
> ----- Original Message -----
> From: "Lee Donald" <Lee.Donald@t-systems.co.uk>
> To: "Nathasha Aleyevka" <naleyevka@yahoo.com>; <ccielab@groupstudy.com>
> Sent: Friday, February 18, 2005 10:42 AM
> Subject: RE: EIGRP Challenge!
>
> > Try the distance command on R1
> >
> >
> >
> > -----Original Message-----
> > From: Nathasha Aleyevka [mailto:naleyevka@yahoo.com]
> > Sent: 18 February 2005 15:21
> > To: ccielab@groupstudy.com
> > Subject: EIGRP Challenge!
> >
> > Hi there,
> >
> > I have been working on the following scenario:
> >
> > | \ / |-----------------F0/0-R2
> > | EIGRP \ / |
> > | 101 \ / EIGRP 100 |
> > |--------------------R1-f0/0-------------- | 10.123.10.0/24
> > | --> / \ |
> > | / \ |-------------------F0/0-R3
> > BB1 / \
> >
> > R1 is running 2 EIGRP processes, EIGRP 101 to BB1 and EIGRP 100 to R2 and
> > R3
> > From BB1 Im receiveing the following routes:
> > 172.168.1.0/24
> > 172.168.2.0/24
> > 172.168.3.0/24
> > 172.168.4.0/24
> > 172.168.5.0/24
> > On R1, I redistributed between the 2 processes, therefore R2 and R3 have
> > all
> > the 172.168.x.x/24 routes in the routing table with an admin distance of
> > 170. So far so good.
> > To meet the requirements, R2 and R3 should see these routes with and admin
> > distance of 90, the config must be done on R1 and I am not allowed:
> > NOT ALLOWED to modify the administrative distance on R1
> > NOT allowed to use route maps
> > NOT allowed to use distribution lists/
> >
> > I was able to get it to work with route maps and modified the admin
> > distance, unfortunately that doesnt meet the requirements. Any
> > suggestions(!)
> > It is much appreciated
> > Thank you
> > Nathasha
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Meet the all-new My Yahoo! Try it today!
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:22 GMT-3