From: Balaji Siva (bsivasub@gmail.com)
Date: Tue Feb 15 2005 - 03:24:32 GMT-3
Well, I see some bugs related to MTU in 3550 in older versions..anyway
what you have observed is not "expected". So if you can "recreate" in
latest version, then open a TAC case so a bug can be filed.
Balaji
On Tue, 15 Feb 2005 01:02:27 -0500, gzdillon@hotmail.com
<gzdillon@hotmail.com> wrote:
> Re: RE: OSPF MTU problem
>
> I met the same problem months ago, the command "show system mtu" showed it is 1546 and I resolved it by command "system mtu 1500".
>
> My problem is :
>
> 1. The command "system mtu" will take effect after reboot, but I DID NOT reboot since I began to config the factory default c3550. Why can it take effect during my configuration.
>
> 2. What can cause the system mtu to change without command "system mtu"? Anybody can REPLAY it?
>
> Best Regards
>
> _______________________________________________________________________
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:20 GMT-3