Re: RE: OSPF MTU problem

From: gzdillon@hotmail.com
Date: Sun Feb 13 2005 - 04:23:26 GMT-3

• Next message: simon hart: "RE: Class-Based Weighted Fair Queueing"
• Previous message: gzdillon@hotmail.com: "route loops between ospf and other"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I met the same problem months ago, the command "show system mtu" showed it is 1546 and I resolved it by command "system mtu 1500".
My problem is :

1. The command "system mtu" will take effect after reboot, but I DID NOT reboot since I began to config the factory default c3550. Why can it take effect during my configuration.

2. What can cause the system mtu to change without command "system mtu"? Anybody can REPLAY it?

  Best Regards

• Next message: simon hart: "RE: Class-Based Weighted Fair Queueing"
• Previous message: gzdillon@hotmail.com: "route loops between ospf and other"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:20 GMT-3