From: Balaji Siva (bsivasub@gmail.com)
Date: Sat Feb 12 2005 - 16:54:19 GMT-3
Hashiru,
This is some cooked up config scenario and so don't read too much into
it as far as best practice or config guidelines. I would think based
on the requirement that all routers in vlan B and 60 should join that
group, R3 which is part of the VLAN B should also be configured with
the join command regardless of it being the RP. Atleast that's what I
would do :)
For example if some router is pinging that group, R3 won't respond in
this configuration even thought it is part of VLAN B and so I believe
it is not a complete configuration.
hope that helps
Balji
On Sat, 12 Feb 2005 11:23:20 -0800 (PST), Idris, Hashiru Aminu
<hashng@yahoo.com> wrote:
> In LAB 5 of the solie book , the multicast chapter,
> in the scenario Scott indicted that the above command
> should be applied to some selected interfaces in the VLANS
> i.e VLANs B & 60. the little confussion here is that the
> command was not applied to R3 (the selected RP)
> now, does this indictes that all RPs should not have this
> command every time or is there any other reason why the router
> escapes that command or a typo error.
> hope someone that hash done the LAB could respond, or
> the author of the chapter himself.
> TIA
> Hashiru
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Search presents - Jib Jab's 'Second Term'
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:20 GMT-3