From: John T M (john_t_mathai@hotmail.com)
Date: Sat Feb 12 2005 - 01:19:19 GMT-3
I was trying the reflexive acl, I am perturbed that it is not working. I am
I missing something here ?? Here is the config at the routers , I tried..
R3 (S0) -------- --------------------------------(S0) R1
R3 Config
interface Serial0
ip address 172.16.0.6 255.255.255.252
ip access-group INCOME in
ip access-group OUTGO out
!
interface Loopback0
ip address 10.0.103.1
!
ip access-list extended INCOME
permit icmp any any echo-reply
permit udp any any eq rip
evaluate ALLOW
ip access-list extended OUTGO
permit tcp any any reflect ALLOW
!
I tried without the ACL and I can telnet into R1, but once I put the ACL it
doesn't work.
Regds/John
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:20 GMT-3