From: Lee Donald (Lee.Donald@t-systems.co.uk)
Date: Fri Feb 11 2005 - 13:58:23 GMT-3
Alter the AD for the eigrp externals using route-maps or distance etc.
-----Original Message-----
From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
Sent: 11 February 2005 16:52
To: ccielab@groupstudy.com
Subject: routing problem
Hi, group
A simple network as below,
RouterA--------RouterB------RouterC--(LAN).
EIGRP was run between router A and B.
BGP was run between router B and C.
Redistributing the BGP into EIGRP was done on RouterB so
that RouterA could get RouterC's routing infomation. The
problem is external eigrp's AD is 170 and IBGP is 200. So,
as a result, RouterC's routing table on RouterB will be
marked as EIGRP. If the RouterB want to communicate with
a PC on RouterC's LAN side, it will send the packet to
router A, because router A makes EIGRP area with router B.
But RouterC will return the pactet back to RouterB because
the next hop for RouterC is Router B. And so on untill the
loop down.
Did I think right? How can I solve the problem?
Thanks
__________________________________
Let's Celebrate Together!
Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/so2005/
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:19 GMT-3