From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Fri Feb 11 2005 - 13:38:50 GMT-3
Hi group,
Anyone could please tell me what is going wrong here? (me or the switch?)
I apply a policy in the input direction of the interface of my 3550 but
actually it is the output traffic that is policed !!!
35550LabCons8# sh run int fa 0/14
Building configuration...
Current configuration : 187 bytes
!
interface FastEthernet0/14
no switchport
ip address 1.1.1.2 255.255.255.252
load-interval 30
service-policy input test
end
35550LabCons8#sh mls qo
35550LabCons8#sh mls qos int fa 0/14
FastEthernet0/14
Attached policy-map for Ingress: test
trust state: not trusted
trust mode: not trusted
COS override: dis
default COS: 0
DSCP Mutation Map: Default DSCP Mutation Map
trust device: none
35550LabCons8#sh poli
35550LabCons8#sh policy-map test
Policy Map test
class test
police 48000 8000 exceed-action drop
35550LabCons8#sh int fa 0/14 | in second
30 second input rate 10333000 bits/sec, 851 packets/sec
30 second output rate 48000 bits/sec, 4 packets/sec
Thanks
-- Richard
**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.
If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support@vanco.info
The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:19 GMT-3