From: Balaji Siva (bsivasub@gmail.com)
Date: Fri Feb 11 2005 - 03:21:33 GMT-3
Basically that's what IPSG does dynamically. Configure a PACL based
on DHCP allocated IP address.
On Thu, 10 Feb 2005 22:09:01 -0800, Narcis Micsoniu <micsoniu@telus.net> wrote:
> Is the port security plus an ACL (access-list 1 permit host HOST_IP)
>
> Lab it up and test it. You might have a surprise !
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Tony
> Schaffran
> Sent: Wednesday, February 09, 2005 6:09 AM
> To: 'vol'; ccielab@groupstudy.com
> Subject: RE: Port security
>
> Have you looked up port security on cisco.com? Maybe looked at the config
> guide for port security?
>
> I am sure you will be able to find the answer there.
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA,
> NNCDS, NNCSS, CNE, MCSE
>
> www.cconlinelabs.com
> Your #1 choice for online Cisco rack rentals.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of vol
> Sent: Tuesday, February 08, 2005 10:50 PM
> To: ccielab@groupstudy.com
> Subject: Port security
>
> Hi group!
>
> Please answer me - what I must to do on catalyst port if I want to allow
> only one host with some MAC and IP to LAN.
> Thanks!
>
> --
> With best wishes,
> Yevgeniy.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:19 GMT-3