From: ccie2be (ccie2be@nyc.rr.com)
Date: Thu Feb 10 2005 - 12:24:08 GMT-3
Hi guys,
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipv6_
c/sa_isis6.htm#wp1036755
I'm confused with the usage of the area-name parameter in the example from the
above link.
This example shows the area-name parameter in the summary steps used with the
router isis command, but in the detailed it doesn't use this parameter.
However, in interface mode, it shows the area-name used with the ipv6 router
isis command.
The command reference doesn't offer much help either.
1) When do I need to use the area-name parameter with the router isis
command?
2) Assuming this parameter is used with the interface command, ipv6 router
isis, and has a value of AREA-1, where else in the config will this parameter
also need to be used? For example, will it have to be used on all other
router interfaces connecting to this same link?
TIA, Tim
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:18 GMT-3