From: Wang Dehong-DWANG1 (Dehong.Wang@motorola.com)
Date: Thu Feb 10 2005 - 01:38:36 GMT-3
Try to get some hand-on experiences with IPv6 for R&S lab. Every time when I ping ipv6 ipaddress, the router askes a output interface. I am wondering what is the suggested IOS image for 2611 routers. The current image on the router is c2600-js-mz.122-15.T14.bin
thanks.
- Dehong
Rack1R1# ping ipv6 FF02::1
Output Interface:
% Interface required
Rack1R1#dir flash:
Directory of flash:/
1 -rw- 18312232 <no date> c2600-js-mz.122-15.T14.bin
33030144 bytes total (14717848 bytes free)
Rack1R1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport <http://www.cisco.com/techsupport>
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 28-Aug-04 06:48 by cmong
Image text-base: 0x80008098, data-base: 0x81D1B400
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-JS-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)
Rack1R1 uptime is 5 weeks, 3 days, 4 hours, 28 minutes
System returned to ROM by reload
System image file is "flash:c2600-js-mz.122-15.T14.bin"
cisco 2611XM (MPC860P) processor (revision 0x200) with 93184K/5120K bytes of memory.
Processor board ID JAE08082RQX (951303035)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
2 Voice FXO interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:18 GMT-3