From: null void (nullv0idmain@yahoo.com)
Date: Fri Feb 04 2005 - 13:05:56 GMT-3
Hi, I was wondering if anyone has further information on conform-action-continue option when configuring CAR , in the dqos / odom book in the policing section it shows a few multi-line rate-limit examples but doesnt really clarify what is required or give detail.. Say we have the following situation:
Limit traffic out of R1 G0/0 interface for traffic destined to hosts on subnet 1.1.1.x from your networks. TCP traffic must be limited to 200Mbps , WWW traffic to 10Mbps , TCP port 3389 to 10Mbps , ftp traffic to 5 Mbps. In the dqos book they show the most specific item listed first which in this case would be all TCP traffic to rate-limit of 2000000 , then they use the conform-action continue , down to 3 other lines that or more granular than just all TCP traffic , so my question is if you have a multi line rate-limit policy to apply what is the thought process in ordering the lines and is the conform-action-continue statement required on the first rate-limit command to use say rate-limit lines 2 through 6 for example.. Below is from a cco doc and this is really all I can find about it.
TIA Null
ContinueThe packet is evaluated using the next rate policy in a chain of rate limits. If there is not another rate policy, the packet is transmitted
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:17 GMT-3